Test Stand Links
Questions or Comments? Please email us!
|
Vortex Motorized Torque Test System
The Vortex is a twin-column motorised torque testing machine. Speed is set
with a rotary potentiomer controller. Either speed or total rotation is indicated
on an LCD display. Torque is measured by a `smart` static torque transducer and displayed on an AFTI.
* Release torque and application torque testing
* Load capacity of stand, 10N.m (90lbf.in)
* Transducer capacities available: 10, 6 and 1.5N.m
* Maximum headroom, 350mm (with upper & lower universal grips fitted)
* Horizontal `daylight`, 280mm
* Speed range, 0.5 - 15 revs/min
* Capacity of upper universal grip, 8 - 55mm
* Capacity of lower universal grip, 10 - 160mm
* Load resolution of AFTI, 1:5000
* Load accuracy, ±0.5% of full scale
What's included
* Stand, crosshead and AFTI mounting fixture
* Facility to apply axial top-load
* AFTI, transducer, and grips available at extra cost
Download the
Vortex Brochure
|
Vortex-i Computer Controlled Torque Test System
The Vortex-i is a twin-column torque testing machine controlled by Mecmesin`s
flexible and user-friendly Emperor software. It has been carefully optimised
for developing torque testing procedures and analyses involving application
and release torques up to 10N.m (90lbf.in)
* Release torque and application torque testing
* Maximum load, 10N.m
* Maximum displacement, 2500 revs
* Maximum headroom, 350mm (with upper & lower universal grips fitted)
* Horizontal `daylight`, 280mm
* Speed range, 0.1 - 20 revs/min
* Loadcell capacities, 0.3, 1.5, 6 or 10N.m
* Capacity of upper universal grip, 8 - 55mm
* Capacity of lower universal grip, 10 - 160mm
* Load resolution, 1:6500
* Load accuracy, ±0.5% of full scale
* Displacement resolution, ±0.001revs
* Displacement accuracy, 0.2 per 36,000 degs
Download the
Vortex-i Brochure
|
Tornado Torque Test System
Perfect for testing any small rotary component, this rugged, lightweight and highly portable
unit is ideally suited to both laboratory and production environments. The versatile mounting
table sits atop an integrated digital torque
sensor and grips the base of your sample, presenting it for application of torque by hand.
* Compact, Portable & Affordable
* Range of Capacities; 1.5N.m (13lbf.in), 3N.m (26lbf.in), 6N.m (50lbf.in), 10N.m (90lbf.in)
* On-board Memory; up to 500 readings
* Audible/Visual Tolerance Alerting
* Tamper-evident Closure Testing; Characterise Both ‘Slip’ & ‘Bridge’ Torques
* Clockwise & Counter-clockwise Digital Torque Capture
* Data Output for Easy Export of Results
* Water Resistant (rated to IP54)
* Clear Digital Display & Intuitive Controls
* Mains or Battery Powered
* Versatile Mounting Table
* Graphical interrogation of results with Dataplot Software (optional).
Download the
Tornado Brochure
|
Orbis Torque Test System
The Orbis Digital Torque Tester features high sampling-rate electronics for accurate peak torque capture,
offering a far greater level of accuracy than mechanical spring-type testers.
* Clockwise & Counter-clockwise Digital Torque Capture
* Compact, Portable & Affordable
* Clear Digital Display & Intuitive Controls
* 6N.m (50 lbf.in) Capacity
* Water Resistant (rated to IP54)
* Data Output for Easy Export of Results
* Mains or Battery Powered
* Versatile Mounting Table
* Graphical interrogation of results with Dataplot Software (optional).
Download the Torque Products Brochure
|
Torque Wrench Checker
Have confidence in the torque you're applying! Verify accuracy of torque
wrenches with this convenient, simple and accurate device. Mecmesin's Torque
Wrench Checker is the perfect quality and safety assurance tool
for critical torque applications in assembly manufacturing.
- Accuracy ±0.5% F.S.D. ±1 L.S.D.
- For use with any click action, break back or dial indicator torque wrench
- Uses AFTI display
Download the:
TWC brochure PDF
Capacity Square Drive
15N·m/150kg·cm/130lb·in 3/8"
60N·m/600kg·cm/520lb·in 3/8"
100N·m/1000kg·cm/870lb·in 1/2"
150N·m/1500kg·cm/1300lb·in 1/2"
600N·m/6000kg·cm/440lb·ft 3/4"
1000N·m/10000kg·cm/720lb·ft 1"
|
|
|
